sizce işe yarar bir kartmı bad usb için

Allah razı olsun çok teşekkür ederim hocam her yerde bunu arıyordum acaba bu alternatif linki nerede buldunuz.

Ben bunu kullanıyorum artık
https://raw.githubusercontent.com/digistump/arduino-boards-index/master/package_digistump_index.json

/*
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .
*/

/*
* HC-SR04 to I2C
*
* This sketch uses the cheap HC-SR04 and an Attiny85
* to emulate the MaxBotix I2C XL.
*
* Code by smurfy 2014 (github@smurfy.de)
*
* Its mainly tested on a “Digispark USB” but
* also runs directly on an Attiny85.
*
* You need the following hardware:
* – Attiny85 (or Digispark USB)
* – HC-SR04 sonar
* – optional 2 x 4.7K resistors (as pull ups)
*
* Connection Schema:
* HC-SR04:
* |————-
* |( ) ( )|
* ————–
* 1 2 3 4
*
* (1) VCC -> VCC 5V
* (2) TRIG -> Pin 2 on Attiny85 (PB3)
* (3) ECHO -> Pin 3 on Attiny85 (PB4)
* (4) GRD -> Ground
*
* Attiny85:
* 1 |–U–| 8
* 2 |—–| 7
* 3 |—–| 6
* 4 |—–| 5
*
* (1) RESET -> nothing
* (2) PB3 -> TRIG on HC-SR04
* (3) PB4 -> ECHO on HC-SR04
* (4) GND -> Ground
* (5) PB0, SDA -> SDA of the I2C Bus
* (6) PB1 -> nothing
* (7) PB2, SCL -> SCL of the I2C Bus
* (8) VCC -> VCC 5V or 3.3V
*
* Optional pull-up 4.7K resistors:
* 1 —[xxxxx]— 2
*
* (1) one side -> VCC 5V or 3.3V
* (2) the other -> SDA or SCL of the I2C Bus
*
* Connect the first pull-up resistor between VCC and SDA
* and the second one between VCC and SCL.
*
* Library dependencies:
* – TinyWireS (https://github.com/rambo/TinyWire)
* – arduino-tiny (https://code.google.com/p/arduino-tiny/)
* – PinChangeInterrupt (https://code.google.com/p/arduino-tiny/)
*/

#include
#include
#define I2C_SLAVE_ADDR 0x70

#define trigPin 3
#define echoPin 4

volatile unsigned long timer_start;
volatile int pulse_time;
boolean sendSecondByte = false;
byte byteDistance = 0;

void handleSonar()
{
if(digitalRead(echoPin) == HIGH)
{
timer_start = micros();